After years of research, design and experience in the pad printing field, COMEC ITALIA now has a new revolutionary unit able to meet the most complex printing tasks, in pad printing. XE-TECH-16-20 is the name of this innovative machine that has the function of being the only fully automatic and computerized pad printing center. The complete system is controlled by a PC Pentium III with WINDOWS XP PRO, axis control board Pmac, and with highly sophisticated software able to autolearn the drawing the printing points and able to choose between 3 differents pads and 6 cliches with hermetic inkcups and ceramic rings. This permits with only one machine to solve all the needs of printing that in the past were managed by many units. The XE-TECH-16-20 can memorize houdreds of programs in the 20 Gb Hard Disk of the PC. Each program can make up to 50 printing phases, adn if needed all programs can be saved in an USB key of 250Mb given with the machine. From the touch-screen  is possible to see the diagnostic of the machine with inputs, outputs and all the alarms. The machine is also  complete  with aoutmatic and programmable pad cleaning, hot air blower model HOT WIND 200 complete with adjustable pipes; a vacuum pump to hold the part during the printing phaseand of cross over infrared barriers for the safety guards.

Struttura in acciaio e alluminio

Steel and alluminium structure

Gruppo di movimentazione testa tampografica su
assi cartesiani x y con motori brushless

One movement group with pad printing head on cartesian
axes x y with brushless motors

Testa tampografica asse z con motore brushless
e attacco porta-tampone magnetico

One pad-printing on axis z, electromechanical brushless motor,
and fast changeover of pad by a magnetic pad holder

3 tamponi con dispositivo di aggancio rapido

3 pads with fast coupling device

Dispositivo automatico di pulizia del tampone

Automatic pad cleaning device

Mensola portapezzi motorizzata

Motorized  fixture support bracket

Protezioni integrali di sicurezza in alluminio e plexiglass con barriere a
raggi infrarossi incrociati - Costruita secondo le attuali normative CE

Built as a security CE norms, with perimetral integral protections made in alluminium and plexiglass with entry barriers with crossing of infrarred rays

TECHNICAL DATA

TOUCH-SCREEN PC   
Pentium III   
SYSTEM    WINDOWS XP PRO
HARD DISK   
20 GB
AXES BOARD   
PMAC
DATA TRASMISSION   
ETHERNET 10/100 Mb
AXES MOTORS   
BRUSHLESS
SPEED   
100 mt/min
ACCURANCY   
± 0,01 mm   
N° OF PRINTING PHASES PER PROGRAM   
50
MAX PAD STROKE   
150 mm
MAX PAD PRESSURE   
1700 N
6 HERMETICALLY SEALED INKCUP   
2Ø 200    4Ø160 mm
MAX PRINTING AREA   
Ø 185      Ø 145 mm
CLICHE’ DIMENSION 
220x440mm  180x360mm
ELECTRIC POWER REQUIREMENTS     
220/380 V 3PH+N 60 Hz   
AUXILIARY COMMAND CIRCUIT   
24 V DC
PNEUMATIC FEEDING   
6 BAR
TOTAL ELECTRICAL INPUT    MAX
10 Kw